I2Cwrapper v0.5.0
Generic framework for Arduino I2C target devices
AccelStepperI2C Member List

This is the complete list of members for AccelStepperI2C, including all inherited members.

AccelStepperI2C(I2Cwrapper *w)AccelStepperI2C
attach(uint8_t interface=AccelStepper::FULL4WIRE, uint8_t pin1=2, uint8_t pin2=3, uint8_t pin3=4, uint8_t pin4=5, bool enable=true)AccelStepperI2C
currentPosition()AccelStepperI2C
disableOutputs()AccelStepperI2C
distanceToGo()AccelStepperI2C
enableEndstops(bool enable=true)AccelStepperI2C
enableInterrupts(bool enable=true)AccelStepperI2C
enableOutputs()AccelStepperI2C
endstops()AccelStepperI2C
getState()AccelStepperI2C
isRunning()AccelStepperI2C
maxSpeed()AccelStepperI2C
move(long relative)AccelStepperI2C
moveTo(long absolute)AccelStepperI2C
myNumAccelStepperI2C
run()AccelStepperI2C
runSpeed()AccelStepperI2C
runSpeedState()AccelStepperI2C
runSpeedToPosition()AccelStepperI2C
runSpeedToPositionState()AccelStepperI2C
runState()AccelStepperI2C
runToNewPosition(long position)AccelStepperI2C
runToPosition()AccelStepperI2C
setAcceleration(float acceleration)AccelStepperI2C
setCurrentPosition(long position)AccelStepperI2C
setEnablePin(uint8_t enablePin=0xff)AccelStepperI2C
setEndstopPin(int8_t pin, bool activeLow, bool internalPullup)AccelStepperI2C
setMaxSpeed(float speed)AccelStepperI2C
setMinPulseWidth(unsigned int minWidth)AccelStepperI2C
setPinsInverted(bool directionInvert=false, bool stepInvert=false, bool enableInvert=false)AccelStepperI2C
setPinsInverted(bool pin1Invert, bool pin2Invert, bool pin3Invert, bool pin4Invert, bool enableInvert)AccelStepperI2C
setSpeed(float speed)AccelStepperI2C
setState(uint8_t newState)AccelStepperI2C
speed()AccelStepperI2C
stop()AccelStepperI2C
stopState()AccelStepperI2C
targetPosition()AccelStepperI2C